Every product is carefully selected by me. If you buy from a link, I may earn a commission. Learn More
I am creating a enema system. And was looking to see if there are any interesting ideas, suggestions about taking it to the next level. This iteration is a highly modified gaming chair.
What I've already created and tested is the enema system. This incorporates a low pressure water pump, a valve, a check valve and an inflatable enema plug to force the water to flow in. This a NSFW video of my first test of the system in a backpack configuration: https://twitter.com/James_Gransk/status/1497779170448973827
In its current chair mounted configuration:https://imgur.com/XnBljoW
I also have an 12v electromagnet locking system on the handles of the chair to restrain the occupants arms until current is cut off. This would be timed.
I am currently running things through the TUYA app on Android. I am controlling things with google home routines, that allow me to activate things using voice command. The idea is to set it up with, for example, a 15 seconds flow-on 1 minute flow-off repeating routine. This is the Tuya interface on Android: https://imgur.com/8B5Xo2w Incredibly simple and no frills, and good for testing the basics.
I want to take some sort of pleasurable device (vibration or stroker) and stagger it with the flows.
The next thing I'd like to incorporate is a "predicament switch" that interrupts the enema flow, at the cost of engaging an e-stim or shock device that is set to a torturous level. This might be something that could still be incorporated using the 4ch switch I am using.
Some ideas that would probably go beyond the limited capabilities of my current level of control are:
Incorporating "tiers" of punishment. For instance every time you interrupt one of the flow cycles, it increases the strength of the electro component.
If you exceed a total number or a consecutive number of interrupts a second pump engages that mixes an irritant into the water (probably castile soap). This would be in the form of a peristaltic pump potentially fed into a T in the lines.
A flow sensor of some sort. I'd like to be able to set things to run based on a certain volume delivered rather than a time spent running.
Using multiple different devices for punishment: e-stim. Shock collar, Electric spanking device, a testicle flicker device, etc.
Some way to randomize which one does each round of punishment.
It would also be interesting to randomized some of the times and thresholds within a designated range, adding an uncertainty to the experience.
The enema system will continue to run after the water is gone. It would be nice to put something in that could detect when the water is all gone and shut things off. The pump won't pump air, so no worries there, but it would be nice to not have it try to run dry. It would also be a plus to be able to modify the routine in some ways after all of the water has been taken in.
It has been years since I have dabbled in the arena. I know there are tools like raspberry pi and Arduino that are available to me, but really lack the knowledge/skill at this point to even know where to begin.
Would love to hear any input. Happy to answer any questions and elaborate on things as well.
Some of the components I'm using so far, if that helps with visualizing things:
Battery with both 5v and 12v output: https://amzn.to/4gfNUxZ
4 Ch Switch: https://amzn.to/4dScgMM
5v Pump: https://amzn.to/3ALaf6k
Line and fittings: https://amzn.to/47brH05
12v Valve: https://amzn.to/47lWNlF
Acrylic Board: https://amzn.to/4d1iBV6
Inflatable Enema Plug: https://amzn.to/3MA5S0w
1way/check valve: https://amzn.to/3TjThTc
Peristaltic pump: https://amzn.to/3AOQGds
Commenti